• Wolverine hardpoint airline assembly for the MTW AK with a metal fitting at each end
1 1

Wolverine Hardpoint Airline Assembly for MTW AK

Wolverine Hardpoint Airline Assembly for MTW AK

£17.95
£17.95
Sale Sold out
Tax included. Shipping calculated at checkout.

In stock

DETAILS

SKU: 9650410323
View full details
The air path between stock and engine on an MTW AK, as a single sealed assembly. O-rings arrive already fitted.

An AK receiver does not give you the straight run an AR does. Routing air from a stock-mounted supply into the engine means working around a different rear trunnion and a different stock interface, which is why Wolverine build a dedicated hardpoint assembly for the AK platform rather than adapting the M4 one.

Air fittings are also the least forgiving part of an HPA build. A seal that is merely adequate holds fine on a bench and then weeps under a full charge on a cold morning. This assembly is specified for regulated HPA and for CO2, which runs at a harsher duty than most people assume, and its seals come pre-fitted rather than left as a bag of o-rings for you to guess at.

It is a sensible spare for anyone running an AK-platform HPA rifle regularly. Airlines are the component most often damaged during a strip-down, and a fresh assembly restores sealing without troubleshooting a slow leak fitting by fitting.

Specifications

Specification Detail
Assembly Hardpoint adapter with pre-fitted o-ring seals
Rated for Regulated HPA and CO2 pressures
Sealing Engineered against pressure drop and air leaks
Platform Wolverine MTW AK

Frequently asked questions

Will it fit an M4-pattern MTW? No. The AK hardpoint is platform-specific. An M4 build takes the standard arrangement instead.

Is a leak always the airline? Not always, but it is the sensible first check. Soapy water on each joint at working pressure will find it in under a minute.

Do I need to re-seal anything on fitting? The o-rings arrive fitted, so no additional sealant is required. Do not over-tighten — compression, not torque, is what makes the joint.

💡 Titan Forge Airsoft tip: Keep a spare in the box if you run an AK build at weekend games — a leaking hardpoint ends your day, and it is a five-minute fix with the part in hand. See HPA lines.