Wolverine Airsoft MTW Forged Tactical 10" SBR
Wolverine Airsoft MTW Forged Tactical 10" SBR
In stock
Notify Me About This Product
Couldn't load pickup availability
DETAILS
DETAILS
- description
Billet and Forged are two different answers to the same problem. A billet receiver is cut from a solid block, which lets Wolverine hold tolerances very tightly. A forged receiver is hammered into shape first and then machined, which is how real AR-15 receivers are made — so a forged MTW has the details a real rifle has, and the ones a billet gun leaves out.
Those details are not cosmetic. The forward assist and the spring-loaded charging handle give you the handling drills you would use on a real carbine. The ambidextrous selector with steel paddles works from either side, which matters if you shoot left-handed or shoulder-swap in cover. The trigger guard comes out with gloved hands on.
This build pairs that receiver with the INFERNO Gen 2 on the Spartan control board. That is the simpler electronics package: everything is set from the gun itself, with no app and nothing to pair. It is also the quieter one to own, because there is no firmware to keep current and no phone to find in a safe zone.
A metal hop unit sits behind a 285mm inner barrel, and empty-mag detection works along with the bolt catch when you run Wolverine magazines. Air comes in through the integrated filtered grip line, so the filter is in the path before the engine sees anything.
What you need to run it
| Item | Notes |
|---|---|
| HPA tank | Not included — see HPA tanks |
| Regulator | Required. Set it inside the 80 to 140 PSI window — see HPA regulators |
| Air line | Not included. Runs through the integrated filtered grip line — see HPA lines |
| Magazine | Most M4/M16 AEG magazines. Empty-mag detection and the bolt catch work with Wolverine's own. Spares in AEG magazines |
| Battery | 7.4V mini LiPo on a JST connector, not included |
Specifications
| Specification | Detail |
|---|---|
| Platform | HPA M4/AR — MTW Forged Series |
| Trim | Tactical |
| Receiver origin | Real AR-15 forgings, machined to MTW spec |
| Upper receiver | Forged 7075 aluminium, with ejection port and forward assist |
| Lower receiver | Forged 7075 aluminium, with a removable trigger guard |
| Charging handle | Spring-loaded |
| Selector | Ambidextrous, with steel paddles |
| Hop-up | Metal |
| Alignment | Intrinsic Alignment — engine, hop and inner barrel on one axis |
| Engine | INFERNO Gen 2 |
| Control board | Spartan Electronics MTW — an all-in-one trigger board and FCU |
| Outer barrel | 10.3 inches |
| Inner barrel | 285mm |
| Rail | Invictus MK2 |
| Flash hider | Invictus MS-2 |
| Grip | DLG premium real-steel |
| Stock | DLG heavy-duty milspec |
| Dust cover | Reversible polymer |
| Trigger | T5 curved |
| Operating pressure | 80 to 140 PSI |
| Muzzle thread | 14mm negative |
| Weight | Within Wolverine's 4.1 to 4.5lb Forged range |
| Air fitting | Integrated filtered grip line, US Foster quick-disconnect |
| Battery | 7.4V mini LiPo on a JST connector, not included |
| Manufacturer | Wolverine Airsoft, Kingsport, Tennessee |
Forged against Billet
| Forged (this one) | Billet | |
|---|---|---|
| Receiver origin | Real AR-15 forgings, then machined | Cut from a solid block |
| Forward assist | Yes | Not fitted |
| Selector | Ambidextrous, steel paddles | Three-position |
| Hop-up | Metal | Not stated by Wolverine |
| Trigger guard | Removable | Not stated by Wolverine |
| Dust cover | Reversible polymer on Tactical | Polymer |
Frequently asked questions
How does this differ from the Forged Tactical XB? Two parts of it. This one has the INFERNO Gen 2 and the Spartan board, both configured at the gun itself. The XB swaps in the XTS engine and the BLINC FCU, which you drive from an app.
Is a forged receiver stronger than a billet one? In real firearms forging aligns the grain of the metal, which is why it is the traditional method. On an airsoft gun neither is anywhere near its limit, so pick the one whose features and feel you prefer rather than worrying about strength.
Does the forward assist actually do anything? Not mechanically, in the way it would on a real rifle. It is there so the handling drills and the manual of arms match, which is the point of a forged receiver.
Can I fit real AR furniture? Yes. Real-steel grips, stocks, buffer tubes and sling plates fit directly, and the rail takes M-LOK accessories.
Can I upgrade the engine later? Yes. The engine, the board and the hop body are all MTW-Spec, so an XTS and a BLINC drop in without touching the receiver.