Wolverine MTW Forged Tactical XB 10" HPA Rifle
Wolverine MTW Forged Tactical XB 10" HPA Rifle
In stock
Notify Me About This Product
Couldn't load pickup availability
DETAILS
DETAILS
- description
There are two ways to make an AR receiver. Billet means cutting it from a solid lump of aluminium, which gives a designer freedom and a distinctive look. Forged means starting from a hammered 7075 blank — the same process real AR-15s use — and machining it after. The grain structure runs differently and so does the feel in the hand.
Wolverine build both. The Forged Series takes real AR-15 forgings and machines each one to their intrinsically aligned HPA spec, which brings some real-steel details along with it: a forward assist on the upper, a removable trigger guard on the lower, an ambidextrous selector with steel paddles, and a reversible polymer dust cover. The Tactical trim also moves to the Invictus MK2 rail with an MS-2 flash hider and DLG premium furniture.
Performance is the same either way. This is the Tactical XB, so it runs the INFERNO XTS engine and the BLINC Bluetooth board at 80 to 140 PSI, and the 10-inch build uses a 285mm inner barrel behind a 10.3-inch outer. If you want the shorter 7-inch, that only exists in billet.
What you need to run it
| Item | Notes |
|---|---|
| HPA tank | Not included — see HPA tanks |
| Regulator | Required. Set it inside the 80 to 140 PSI window — see HPA regulators |
| Air line | Not included — see HPA lines |
| Magazine | Takes most M4/M16 AEG magazines. Spares in AEG magazines |
| Battery | 7.4V mini LiPo on a JST connector, not included |
Specifications
| Specification | Detail |
|---|---|
| Platform | HPA M4/AR — MTW Forged Series |
| Upper receiver | Forged 7075 aluminium, with ejection port and forward assist |
| Lower receiver | Forged 7075 aluminium, with removable trigger guard |
| Engine | INFERNO XTS |
| Control board | BLINC Bluetooth FCU |
| Outer barrel | 10.3 inches |
| Rail | 10-inch Invictus MK2 M-LOK |
| Inner barrel | 285mm |
| Hop-up | Metal |
| Flash hider | Invictus MS-2 |
| Grip | DLG premium real-steel |
| Stock | DLG heavy-duty milspec |
| Selector | Ambidextrous, with steel paddles |
| Dust cover | Reversible polymer |
| Trigger guard | Removable |
| Forward assist | Fitted |
| Trigger | T5 curved |
| Operating pressure | 80 to 140 PSI |
| Output energy | 1 to 3 joules, adjustable |
| Rate of fire | 5 to 35 RPS, adjustable |
| Dwell | Fully adjustable |
| Muzzle thread | 14mm negative |
| Weight | Wolverine quote 4.1 to 4.5lb across the Forged range |
| Magazines | Most M4/M16 AEG magazines. Empty-mag detection and a working bolt catch with Wolverine magazines |
| App | BLINC — fire modes, profiles, chronograph, autotune dwell |
Billet or forged
| Billet Series | Forged Series | |
|---|---|---|
| Receiver | Machined from solid aluminium, Gen 3 set | Real AR-15 forgings in 7075, then machined to HPA spec |
| Forward assist | Not listed | Fitted |
| Trigger guard | Not listed | Removable |
| Selector | Standard | Ambidextrous, steel paddles |
| Hop-up | Rotary | Metal |
| Tactical rail | Invictus MK-1 | Invictus MK2 |
| Tactical flash hider | 1045 steel, black oxide | Invictus MS-2 |
| Tactical furniture | Premium real-steel grip, milspec stock | DLG premium grip, DLG heavy-duty milspec stock |
| Lengths | 7, 10 and 14 inch | 10 and 14 inch |
Frequently asked questions
Is a forged receiver stronger? Forging aligns the grain of the aluminium, which is why real firearms use it. In airsoft service either construction is far beyond what the gun sees — pick the one you prefer the look and feel of.
Does it shoot any differently from the billet? No. Same engine, same board, same pressure window, same barrel lengths where they overlap.
What is an MS-2? Invictus's flash hider for the Forged Tactical trim. The Forged Standard uses an MS-1, and the Billet Tactical uses a 1045 steel hider with a black oxide finish.
Can I get it in 7 inch? Not in forged. Wolverine offer the Forged Series in 10 and 14 inch only — the 7-inch is a billet build.
Will my MTW parts fit? Yes. It is MTW-Spec, so engines, hop bodies and inner barrels interchange, along with standard handguards and a lot of real-steel AR furniture.