1 8

AIM-O ACRO P-2 Pistol Red Dot

AIM-O ACRO P-2 Pistol Red Dot

£90.95
£90.95
Sale Sold out
Tax included. Shipping calculated at checkout.

In stock

Colour: Black
  • Tracked delivery. Free on UK orders over £150.
  • Not sure it's right for you? WhatsApp us 24/7. Send a photo of your setup and we'll check it.
  • Collect in store. Free click & collect from our shop at Skirmish Wycombe.

DETAILS

SKU: 28430319
View full details
AIM-O ACRO P-2 Pistol Red Dot — the emitter is sealed inside the housing, which is the whole argument for this pattern on a gun that gets shot at. A 3.5 MOA dot in a closed aluminium box.

An open reflex works by bouncing light off an angled lens from an emitter sitting in the open air beside it. That arrangement has an obvious problem on an airsoft pistol: rain on the lens smears the dot, dust on the emitter dims it, and a BB landing in the gap between the two can end the optic outright.

A closed pattern puts both the lens and the emitter inside a sealed box with glass at each end. Everything that reaches the optic hits the outside of the housing. That is why this shape has taken over duty pistol use and why it makes sense on a skirmish gun, where incoming fire is guaranteed rather than theoretical.

The dot is 3.5 MOA with several brightness settings, the body is high-grade aluminium, and it runs on a CR2032. It mounts through standard pistol optic systems and carries over onto rifles and submachine guns on the right plate.

Both finishes are the same optic at the same price, which is unusual — most colourways in this range carry a few pounds of difference, and these two do not.

Specifications

Specification Detail
Pattern ACRO P-2
Magnification 1x
Dot size 3.5 MOA
Dot colour Red
Housing Fully enclosed emitter
Brightness Multiple settings
Material High-grade aluminium
Battery CR2032
Protection Sealed against BB impacts, dust and rain
Finishes Black or dark earth

Good to know before you buy

Enclosed means heavier and taller than an open micro. That is the trade for the sealed emitter, and on a pistol it is usually worth making.

Check what your slide is cut for. The ACRO footprint is its own pattern and is not interchangeable with the RMR cut without a plate.

A sealed housing still has two glass faces to keep clean. The front one takes the hits, so a wipe before each game is worth the ten seconds.

Frequently asked questions

Why pay more for an enclosed sight?
Because the emitter cannot get wet, dirty or hit. On an open sight those three things each degrade the dot, and on an airsoft gun all three happen regularly.

Will it fit an RMR-cut slide?
Not directly. The ACRO uses its own mounting pattern, so an RMR-cut slide needs an adaptor plate.

Can I use it on a rifle?
Yes, with a plate that converts the footprint to a 20 mm rail. It is a solid choice as an offset backup beside a magnified optic.

How long does the battery last?
AIM-O do not publish a runtime figure. It takes a CR2032, so carry a spare and wind it off when the gun goes away.

Is there any difference between the two colours?
None, including the price. Pick whichever matches the gun.

💡 Titan Forge Airsoft tip: Sealed optics suit guns that take direct fire. If weight matters more than sealing, the open patterns are in sights and optics.