1 10

AIM-O T2 Red Dot with QD Mount

AIM-O T2 Red Dot with QD Mount

£62.95
£62.95
Sale Sold out
Tax included. Shipping calculated at checkout.

In stock

Colour: Black
  • Tracked delivery. Free on UK orders over £150.
  • Not sure it's right for you? WhatsApp us 24/7. Send a photo of your setup and we'll check it.
  • Collect in store. Free click & collect from our shop at Skirmish Wycombe.

DETAILS

SKU: 97471767
View full details
AIM-O T2 Red Dot with QD Mount — eleven brightness steps, which is the most in this range and the reason to pick it over the T1. Eighty millimetres of aluminium tube at 170 g, red only.

Brightness granularity sounds like a specification nobody needs until you play a night game. Five steps gives you coarse jumps: one setting is too dim to find and the next washes out everything behind it. Eleven steps means there is always one that is right, which is the whole difference between a sight you trust after dark and one you fight with.

It is the bigger brother to the T1 pattern — 80 mm long against 74, and 170 g against 140 — and the extra length buys a slightly longer tube and a more substantial housing. Eye diameter stays at 24 mm, so the sight picture is familiar.

The dot is red and there is no second colour. Our T1 listing covers that ground if a green reticle matters to you; what you get here instead is finer command of how bright the red is.

The quick-release mount is included, the housing is aluminium with anti-reflective coated glass, and it takes a CR1632. Lens caps are in the box.

Specifications

Specification Detail
Pattern T2 micro
Magnification 1x
Dot colour Red
Brightness Eleven levels
Eye diameter 24 mm
Length 80 mm
Height 40 mm
Weight About 170 g
Material Aluminium
Battery 1x CR1632, not supplied
Mount 20 mm rail, quick release
Supplied with Lens caps

Good to know before you buy

Eleven levels is the selling point and it is also eleven presses to get from one end to the other. Find your two usual settings and learn how many clicks apart they are.

Thirty grams heavier and six millimetres longer than the T1 pattern. Neither figure matters on a rifle; on a pistol-calibre carbine you may prefer the smaller one.

There is no green setting here. The T1 version in our range has one, at the cost of coarser brightness control, so the two sights answer different priorities.

Frequently asked questions

T1 or T2, which should I buy?
T2 if you play night games or want fine control over the dot. T1 if you want a green option for woodland and do not mind coarser brightness jumps.

Does it use the same mount as the T1?
Both are supplied with a quick-release mount and both sit on the widely supported micro footprint, so aftermarket mounts fit either.

What is the eye diameter actually telling me?
How wide the glass you look through is. Twenty-four millimetres is standard for a micro tube and is a comfortable window once your head is behind it.

Is it waterproof?
AIM-O list it as shockproof with coated, scratch-resistant glass. That covers rain and knocks rather than immersion.

Which colour is dearer?
The dark earth, by a few pounds, because that is what our supplier charges for it.

💡 Titan Forge Airsoft tip: Eleven brightness steps earn their keep after dark — worth pairing with a torch from torches and laser units for a night game.