Skip to product information
1 of 3

AirTac Archwick APC9K to Drum Mag HPA Adapter (Modular)

AirTac Archwick APC9K to Drum Mag HPA Adapter (Modular)

Regular price £69.95
Regular price Sale price £69.95
Sale Sold out
Tax included. Shipping calculated at checkout.

Low stock

  • Tracked delivery. Free on UK orders over £150.
  • Not sure it's right for you? WhatsApp us 24/7. Send a photo of your setup and we'll check it.
  • Collect in store. Free click & collect from our shop at Skirmish Wycombe.

DETAILS

SKU: 96622639
View full details
AirTac Archwick APC9K to Drum Mag HPA Adapter — HPA power, fed from a drum. A modular drum base for the APC9K, with the feed lips and high-flow valve already installed.

Converting an APC9K to HPA fixes the two things that bother people about gas: the velocity drift as a magazine cools, and the cost of feeding it. This adapter does that and goes one further by taking a drum rather than a stick magazine.

The drum base accepts Tokyo Marui MP5 and Scorpion compact drums, which hold four hundred rounds and give you well over a hundred BBs from a single wind. Jing Gong VZ61 drums are also listed as compatible, although they are hard to find. Two 25mm pins come with the adapter to mount it to the drum.

The feed lips and the high-flow valve are fitted before it reaches you. What you need to supply is the gas router out of a donor APC9K magazine, and the drum itself, which is not included.

Specifications

Specification Detail
Donor gun Archwick APC9K
Feeds from Tokyo Marui MP5 or Scorpion compact drum magazine
Also listed as compatible Jing Gong VZ61 drum
Drum capacity 400 rounds, over 100 BBs per wind
Supplied fitted Feed lips and high-flow valve
Donor part required Gas router from an APC9K magazine
Drum included No
Mounting Two 25mm pins supplied
Fitting US-style Foster
Working pressure 90 to 150 PSI
Pressure ceiling 150 PSI

Good to know before you buy

This is not plug-and-play. You need the gas router from an APC9K magazine as a donor part, and you need a drum, because the base is sold without one.

The internal volume is smaller than a gas magazine, which is why the window is 90 to 150 PSI. If you want more velocity, go to a tighter or longer inner barrel, heavier BBs or a better bucking rather than more pressure. If the gun has an NPAS, open it fully.

Insert the adapter with the bolt held back. Pushing it in against a closed nozzle loading arm is how the arm gets bent.

Frequently asked questions

Which drums actually fit?
Tokyo Marui MP5 and Scorpion compact drums are the published fit, and Jing Gong VZ61 drums are listed too though they are scarce. The drum is not supplied.

What do I have to donate from a magazine?
The gas router out of an APC9K magazine. Everything else in the air path comes fitted.

Why is 150 PSI the limit?
The adapter holds less air than a gas magazine, so it is designed around a 90 to 150 PSI window. Past that you load the seals for no gain, because the hammer struggles to open the valve properly anyway.

What fitting does it use?
A US-style Foster, which is the common airsoft HPA fitting and matches the rest of the AirTac equipment we sell.

Can I run it off a paintball tank?
No. Paintball tanks, CO2 tanks and Tippmann-pattern lines are all off limits for this part. Regulated air through a secondary regulator, nothing else.

⚠ Always run a secondary regulator. Never put tank pressure straight into the engine. Set your output before you shoot, and chrono at the site every time.
💡 Titan Forge Airsoft tip: Regulators and lines to feed it are in HPA Accessories, and the rest of the range is under AirTac.