AirTac Tokyo Marui SAIGA-12K / SAIGA SBS M4 HPA Adapter
AirTac Tokyo Marui SAIGA-12K / SAIGA SBS M4 HPA Adapter
Out of stock
Notify Me About This Product
Couldn't load pickup availability
DETAILS
DETAILS
- description
The Tokyo Marui SAIGA-12K is one of airsoft's most distinctive platforms — a Kalashnikov-derived shotgun that sits in a unique category between rifle and shotgun play. On gas, it faces the same limitations as any GBB: temperature sensitivity and per-shot consistency variation. On HPA, those limitations disappear, and the Saiga's cyclic rate and shot consistency become as reliable as any HPA-powered rifle.
AirTac has designed this adapter specifically to complement the Saiga's Kalashnikov aesthetic. The one-piece polycarbonate construction with a single enhanced internal volume — compared to earlier two-piece designs — allows the adapter to operate effectively at around 80psi, lower than many HPA adapters, while maintaining reliable cycling. The lower operating pressure is beneficial for the Saiga's internally gas-routed design. The NBR (nitrile butadiene rubber) gas router is injection-moulded to 1:1 factory spec, meaning it seats correctly in the Saiga's gas route without modification and can be replaced with a factory or aftermarket router if ever needed.
BB retention is integrated into the design — only 2–3 BBs are dropped when changing magazines, maintaining the practical advantage of fast reloads without losing significant ammo. Compatible with most M4 AEG magazines; PTS EPM1/EPM1S strongly recommended for their strong springs and consistent fitment.
What you need to run this adapter
| Item | Notes |
|---|---|
| HPA tank | Any paintball/airsoft HPA tank |
| Secondary regulator | AirTac AT200 or equivalent — always required. Set to 90–150psi range |
| HPA line | US Foster fitting line |
| M4 AEG magazine | PTS EPM1/EPM1S recommended; fast-feed magazines also work well |
Specifications
| Specification | Detail |
|---|---|
| Compatible platform | Tokyo Marui SAIGA-12K and SAIGA SBS |
| Construction | One-piece injection-moulded polycarbonate (upper + lower combined) |
| Architecture | Plug-and-play — no donor parts required |
| Gas router | Injection-moulded NBR — 1:1 factory spec dimensions |
| Internal volume | Enhanced — single-piece design with higher volume than earlier two-piece versions |
| Operating pressure range | ~80psi minimum; 90–150psi effective range |
| BB retention on mag change | 2–3 BBs dropped only |
| Magazine compatibility | Most M4 AEG magazines; PTS EPM1/EPM1S and fast-feed recommended |
| HPA fitting | US Foster (standard) |
| Warranty | Lifetime warranty (AirTac) |
Package Contents
| Item | Qty |
|---|---|
| AirTac SAIGA-12K/SBS M4 HPA Adapter (fully assembled) | 1 |