Skip to product information
1 of 4

Archwick Javelin AEG Bucking

Archwick Javelin AEG Bucking

Regular price £9.95
Regular price Sale price £9.95
Sale Sold out
Tax included. Shipping calculated at checkout.

In stock

Compound: NBR
Hardness: 60
  • Tracked delivery. Free on UK orders over £150.
  • Not sure it's right for you? WhatsApp us 24/7. Send a photo of your setup and we'll check it.
  • Collect in store. Free click & collect from our shop at Skirmish Wycombe.

DETAILS

SKU:
View full details
Archwick Javelin AEG Bucking — a bleed channel and a three-point BB channel, for under a tenner. Four versions: NBR or silicone, in 50 or 60.

An AEG fires faster than anything else you own, so the bucking is the part doing the most work and wearing out first. It is also the cheapest thing in the gun that changes how it shoots. The Javelin is Archwick’s AEG-specific design and it brings two ideas you do not usually get at this money.

The first is a patented channel across the top of the lip. It lets a little air escape from behind the BB as the round leaves, which cuts the turbulence chasing it down the barrel. Less turbulence means the Magnus effect that the hop relies on works cleanly, and the BB touches the barrel wall less on the way out. Flatter flight, tighter groups.

The second is the shape of the feed channel itself. A Y profile with a directional guide holds the round on three points instead of letting it sit wherever it lands, so every BB starts from the same place. The pressure point is sized and shaped to control how long the contact lasts rather than just how hard it is.

Choose your compound and hardness above. It arrives in a rigid clear case, which sounds like packaging trivia until you have fitted a bucking that spent a month squashed flat in a jiffy bag.

Specifications

Specification Detail
Platform AEG
Range Archwick Javelin
Compounds NBR or silicone
Hardness 50 or 60
Feed channel Y profile with a directional guide, three points of contact
Air channel Patented directional bleed channel across the lip
Pressure point Shaped and sized to control contact duration
Packaging Rigid clear case to prevent deformation in transit
Supplied as One bucking
Bore compatibility Not stated by the manufacturer at time of writing
Dimensions Not stated by the manufacturer at time of writing

Good to know before you buy

Hardness is quoted the way the airsoft trade quotes it, as a bare number. Lower is softer. A 50 grips a light BB well and suits lower-powered guns; a 60 holds up better under higher power and heavier ammunition. If you are running 0.28g and above, start at 60.

Silicone stays flexible in the cold and tends to last longer. NBR has more initial grip and a slightly sharper feel. Neither is simply better, and plenty of people keep one of each in the box and swap after a cold morning.

No bore or dimension figures are published for this bucking. It is sold as an AEG part, so it is cut for a standard AEG chamber, but if you are running an unusual chamber ask us first.

Frequently asked questions

NBR or silicone?
Silicone for cold weather and longevity, NBR for grip and feel. The difference is smaller than the internet suggests and both are under a tenner, so trying both is cheap.

50 or 60?
Lower numbers are softer. Go 50 for lower-powered guns and light BBs, 60 for more power or heavier ammunition.

What does the bleed channel actually do?
It vents a small amount of air from behind the BB so the air chasing it is less turbulent. That makes the backspin work more cleanly and reduces how much the round brushes the barrel wall.

Will it fit my chamber?
It is an AEG bucking, so a standard AEG hop chamber. No bore figures are published, so check with us if your chamber is a specialist unit.

Do I need a new nub as well?
Not necessarily. The pressure point on this one is part of the design, so fit it on its own first and see what you get.

💡 Titan Forge Airsoft tip: Inner barrels to pair it with are in Inner Barrels, and the rest of the hop parts are in Hop Rubbers.