Skip to product information
1 of 4

Archwick Trident GBB Bucking

Archwick Trident GBB Bucking

Regular price £9.95
Regular price Sale price £9.95
Sale Sold out
Tax included. Shipping calculated at checkout.

In stock

Compound: NBR
Hardness: 70
  • Tracked delivery. Free on UK orders over £150.
  • Not sure it's right for you? WhatsApp us 24/7. Send a photo of your setup and we'll check it.
  • Collect in store. Free click & collect from our shop at Skirmish Wycombe.

DETAILS

SKU:
View full details
Archwick Trident GBB Bucking — built for the harder hit a gas gun gives it. NBR or silicone, 60 or 70, in the harder end of the range on purpose.

Gas guns are not kinder to a bucking than an AEG, they are just unkind in a different way. The pressure arrives as a spike rather than a push, the nozzle slams forward on every cycle, and cold weather drops the pressure then warm weather brings it back. A rubber that is happy in an electric gun can be shoved out of shape in a gas one.

That is why this range starts at 60 and goes to 70, rather than 50 and 60. Harder compounds resist being deformed by the spike and hold their shape across a magazine as the gas temperature falls away under you.

The engineering is the same as the rest of the family and it is worth having: a patented vent across the lip that bleeds the air pocket behind the round so it flies through less disturbance, and a Y-shaped guide that pins the BB on three faces so it sits identically shot after shot. The pressure point geometry controls how long the rubber stays in contact, not just how firmly.

Pick the compound and hardness above. Each one ships in a hard clear case so it reaches you the shape it left the factory.

Specifications

Specification Detail
Platform Gas blowback
Range Archwick Trident
Compounds NBR or silicone
Hardness 60 or 70
Feed channel Y profile with a directional guide, three faces of contact
Air channel Patented directional bleed channel across the lip
Pressure point Geometry sets contact duration as well as force
Packaging Rigid clear case to prevent deformation in transit
Supplied as One bucking
Bore compatibility Not stated by the manufacturer at time of writing
Dimensions Not stated by the manufacturer at time of writing

Good to know before you buy

The hardness numbers run harder than the AEG range for a reason. Going softer than 60 in a gas gun usually means the lip gets pushed about by the pressure spike and your grouping wanders as the magazine warms and cools.

Silicone copes better with a cold morning, which on a gas gun is the difference between a consistent first magazine and a frustrating one. NBR gives more bite if you are chasing hop on heavy ammunition in mild weather.

No bore or dimensional figures are published. It is sold as a gas blowback part, so it suits a standard GBB chamber. Anything bespoke, ask before ordering.

Frequently asked questions

Why does this one start at 60?
Gas delivers its pressure as a spike. Softer rubber deforms under it, so the gas range is deliberately harder than the electric range.

60 or 70?
Sixty for most gas guns on standard power and ammunition. Seventy if you run hot, use CO2, or shoot heavy BBs and want the lip to hold its shape.

Which compound for winter?
Silicone. It stays flexible when the temperature drops, which matters more on gas than on anything else.

Is it the same rubber as the AEG version?
Same design family and the same air and guide channels, different hardness range and cut for a gas chamber. They are not interchangeable listings.

Will it work with a CO2 magazine?
Yes, and the 70 is the sensible choice if CO2 is your normal propellant.

💡 Titan Forge Airsoft tip: Gas gun internals sit under Spare and Upgrade Parts, and tightbore barrels are in Inner Barrels.