CYMA Platinum CM041L - Modernised MP5K with PDW Stock
CYMA Platinum CM041L - Modernised MP5K with PDW Stock
Out of stock
Notify Me About This Product
Couldn't load pickup availability
DETAILS
DETAILS
- description
The Platinum CM041L reimagines the tiny MP5K for modern loadouts: a short M-LOK rail and a retractable PDW stock wrapped around Platinum-grade internals. It stays one of the smallest primaries you can field, yet shoots with a snap its dimensions don't hint at.
What's on the outside
Up front is a short M-LOK rail with a vertical grip; at the rear, a PDW stock that pulls in tight. Ambidextrous controls suit either hand and the 14mm CCW thread under the muzzle accepts a tracer or suppressor.
Specifications
| Specification | Detail |
|---|---|
| Platform | Modernised MP5K (Umarex licensed) |
| Series | CYMA Platinum |
| Construction | Metal & nylon |
| Handguard | 3-inch M-LOK |
| Stock | Retractable PDW |
| Controls | Ambidextrous |
| Gearbox | Version 3 |
| Control | Pre-installed MOSFET |
| Bearings | 7mm steel ball |
| Piston | Reinforced, metal-tooth |
| Inner barrel | 110mm |
| Hop-up | Rotary, adjustable |
| Muzzle | 14mm CCW thread |
| Magazine | 130rd mid-cap |
| Battery | 7.4V LiPo (T-connector) |
| Length | 455 / 550mm |
| Weight | ~2700g |
| Fire modes | Safe / Semi / Full |
In the box
| Item | Qty |
|---|---|
| CYMA Platinum CM041L | 1 |
| 130rd mid-cap magazine | 1 |
| Vertical grip | 1 |
Good to know before you buy
A pre-installed MOSFET and a 7.4V LiPo give it a brisk trigger, and the short Version 3 gearbox is sized for the MP5K's compact body. If you want the absolute smallest Platinum MP5 and don't need a long barrel, this is the pick.
Frequently asked questions
What battery suits the Platinum CM041L?
A 7.4V LiPo with a T-connector, charged on a balance charger in a charging-safe bag.
What are the overall dimensions?
With the retractable PDW stock collapsed it is 455mm long, opening out to 550mm, and the listed weight is roughly 2700g.
What's inside the Platinum CM041L?
A Version 3 gearbox with a pre-installed MOSFET, steel ball bearings, a reinforced metal-tooth piston and a 110mm inner barrel behind a rotary adjustable hop-up.
Is there room for accessories?
A 3-inch M-LOK rail sits under the front end with the included vertical grip, leaving space for a small torch or laser.
Can it run a tracer?
The muzzle carries a 14mm CCW thread, so a counter-clockwise tracer unit or suppressor will fit.
UKARA: As a realistic imitation firearm, this product requires UKARA registration or a valid defence. We verify at checkout. Register by playing 3 games over 56+ days at Skirmish Wycombe Airsoft.