CYMA Platinum GEN2 CM097D - 10.5" SD AR-15/M4
CYMA Platinum GEN2 CM097D - 10.5" SD AR-15/M4
Low stock
Notify Me About This Product
Couldn't load pickup availability
DETAILS
DETAILS
- description
The CM097D takes the compact 10.5" CM097 and adds an SD mock suppressor, stretching the silhouette into something sleeker and more purposeful while keeping the handy short-barrel feel underneath. It's the pick if you like the stealthy SD aesthetic but still want a quick, modern carbine.
What's on the outside
Beyond the suppressor it's pure modern AR: a slim M-LOK forend, a Picatinny top rail wearing flip-up irons, a comfortable grip and an adjustable crane stock with QD sling sockets. The mock suppressor unthreads for a tracer or muzzle device down the line.
Specifications
| Specification | Detail |
|---|---|
| Platform | AR-15 / M4 AEG |
| Configuration | 10.5" SD (suppressed) |
| Suppressor | Mock SD, removable |
| Handguard | M-LOK |
| Best for | Stealth / mid-range |
| Series | CYMA Platinum GEN2 (E-Edition) |
| Construction | Full-metal receiver & rail, polymer furniture |
| Gearbox | GEN2 reinforced Version 2, quick-change spring |
| Control system | EShooter Kestrel ETU — programmable (burst, binary, pre-cocking, active braking, voltage protection) |
| Gears | 13:1 high-speed steel |
| Bushings | 8mm steel ball-bearing |
| Piston | Polycarbonate, full steel rack |
| Piston / cylinder head | CNC aluminium silent set, double O-ring |
| Spring guide | Quick-change ball-bearing |
| Nozzle | CNC O-ring |
| Motor | High-torque |
| Inner barrel | 6.03mm tightbore |
| Hop-up | Rotary, adjustable |
| Rails | M-LOK handguard + full-length 20mm upper Picatinny |
| Sights | Flip-up front & rear |
| Stock | Adjustable crane, QD sling points |
| Connector | Deans (T-plug) |
| Recommended battery | 7.4V or 11.1V LiPo, crane format |
| Rate of fire | ~25 rds/sec (11.1V LiPo) |
| Fire modes | Safe / Semi / Full (+ programmable burst/binary) |
| Magazine | High-capacity included; STANAG M4/AR-15 compatible |
| Parts compatibility | Tokyo Marui V2 spec |
In the box
| Item | Qty |
|---|---|
| CYMA Platinum GEN2 CM097D - 10.5" SD AR-15/M4 | 1 |
| High-capacity magazine | 1 |
Good to know before you buy
The drivetrain is the Platinum E-Edition setup — reinforced GEN2 gearbox under an EShooter Kestrel control unit — for programmable triggers, strong response and battery protection. Full metal where it counts, full Tokyo Marui compatibility for later upgrades.
Frequently asked questions
Does the CM097D suppressor come off?
Yes. The SD mock suppressor is removable, so the 10.5" carbine can later carry a tracer unit or another muzzle device instead.
How does the CM097D differ from the CM097B?
Both are 10.5" Platinum GEN2 carbines with the same internals, but the D is dressed with the SD mock suppressor for a longer, stealthier profile on a slim M-LOK forend.
What battery does the CM097D SD take?
Its listing recommends a crane-format LiPo at 7.4V or 11.1V, wired to a Deans plug, with the Kestrel ETU guarding against low or high voltage.
What's inside the SD's gearbox?
A reinforced GEN2 Version 2 shell with 8mm steel ball bearings, 13:1 steel high-speed gears, a CNC aluminium silent piston head with double O-rings and a high-torque motor, all run through an EShooter Kestrel ETU.
Can I change the spring easily?
Yes. The quick-change ball-bearing spring guide means the spring can come out without a full strip.
UKARA: As a realistic imitation firearm, this product requires UKARA registration or a valid defence. We verify at checkout. Register by playing 3 games over 56+ days at Skirmish Wycombe Airsoft.