1 1

CYMA Platinum GEN2 CM098 — M110 Semi-Only DMR

CYMA Platinum GEN2 CM098 — M110 Semi-Only DMR

£343.95
£343.95
Sale Sold out
Tax included. Shipping calculated at checkout.

Low stock

DETAILS

SKU: 34539308
View full details
A 510mm barrel, semi only, and a rail long enough to put the scope where you want it. This is the M110 pattern — the 7.62 marksman rifle built on the AR-10 receiver — and at 1075mm it is unapologetically a long gun.

A designated marksman rifle is a specific job rather than a bigger carbine. It holds an angle, it reaches past where a 5.56 replica stops being useful, and it does that from a supported position far more often than on the move. Everything about this one is set up for that: the length, the semi-only selector and the 510mm inner barrel.

The handguard follows the real M110, with a full-length RIS rail running along its top and continuing across the upper receiver. That matters more than it sounds — a continuous rail lets you mount a scope where your eye actually sits rather than where a short rail allows, and the remaining rail sections take a bipod.

Internally it is the long Version 2 gearbox with steel SR25 gears, which is a different parts family from any M4. The nozzle is 24.28mm, the cylinder is full steel and the trigger unit is the Kestrel V2LONG, specified for this gearbox rather than borrowed from a carbine.

Specifications

Specification Detail
Platform M110 / AR-10 pattern, 7.62 x 51 replica
Series CYMA Platinum GEN2
Gearbox Version 2 long, QSC quick-change spring
Trigger unit Kestrel V2LONG MOSFET / ETU
Motor Long neodymium high-torque, for V2 long
Bearings 8mm steel ball
Gears Steel, SR25 pattern
Piston Full steel tooth rack, aluminium piston head
Cylinder Full steel, aluminium head, 24.28mm Teflon nozzle
Inner barrel 510mm, 6.03mm brass
Hop-up Polymer rotary, exposed by the bolt catch
Handguard M110 pattern, full-length RIS rail
Sights Folding front and rear aperture
Magazine 170rd mid-cap
Battery T-connector inside the stock, not included
Stock Fixed, adjustable cheek pad
Length 1,075mm
Weight Approx. 3,254g without magazine
Fire modes Semi-automatic only
Sling point Ambidextrous QD on the stock

In the box

Item Qty
CYMA Platinum GEN2 CM098 1
170rd mid-cap magazine 2

Good to know

The bolt catch works. Pull the charging handle and the mock bolt carrier stays back, which is how you get at the rotary hop-up; press the catch and it runs forward and closes the port again. It is a better arrangement than wedging the handle open.

This is a long gearbox with SR25 gears. Parts listed for a standard V2 are the wrong parts, and that includes the nozzle, which is 24.28mm rather than the usual M4 length.

Frequently asked questions

Is it semi only? Yes. CYMA configure it for semi-automatic fire, which is how a DMR is meant to be run.

Will M4 internals fit? No. It is a Version 2 long gearbox with SR25 gears, so nozzles, pistons and the shell are a different family from any M4.

Can I mount a scope and a bipod? Yes. A full-length RIS rail runs the length of the handguard and upper receiver for the optic, and the other rail sections take a bipod.

What magazines does it use? AR-10 and SR25 pattern. Two 170-round mid-caps are supplied.

⚠ UKARA: As a realistic imitation firearm, this product requires UKARA registration or a valid defence. We verify at checkout. Register by playing 3 games over 56+ days at Skirmish Wycombe Airsoft.
💡 Titan Forge Airsoft tip: A semi-only rifle with a 510mm barrel is only as good as the glass on top of it, and the full-length rail means you can set eye relief properly. Have a look through sights and optics.