• Rebel HPA fill hose 1 metre for refilling airsoft HPA tanks
  • Rebel HPA fill hose showing high-pressure fill fitting
  • Rebel HPA fill hose connected between a SCUBA bottle and an HPA tank
  • Rebel HPA fill hose flexible anti-kink construction detail
  • Rebel HPA fill hose 1M coiled for storage
1 5

Rebel HPA Fill Hose 1M

Rebel HPA Fill Hose 1M

£33.95
£33.95
Sale Sold out
Tax included. Shipping calculated at checkout.

In stock

DETAILS

SKU: 88528350
View full details
Rebel HPA Fill Hose 1M — the hose that refills your tank between games, not the one you play with.

This is a fill hose, and it is worth being clear about that first because the two get confused constantly. A fill hose connects a SCUBA bottle or compressor fill station to the fill nipple on your tank regulator, so you can top the tank up at home or in the car park. A remote line is the entirely different hose that runs from tank to gun while you play.

If you fill your own tanks rather than paying for fills at a site, this is what you need. A metre of reach means the SCUBA bottle can stand where it is comfortable rather than pressed against your tank, and the flexible construction stops the hose kinking as you move it into position.

It is high-pressure rated for the pressures involved in tank-to-tank transfer, with precision fittings that seal cleanly at both ends. Filling your own is worth doing if you play often — a full SCUBA bottle covers a lot of game days.

Specifications

Specification Detail
Type Fill hose — tank refilling only, not for play
Length 1 metre / 100cm
Construction High-pressure rated, flexible, anti-kink
Fittings Precision fill fittings, leak-free seal
Connects SCUBA bottle or compressor fill station to HPA tank
Air type Compressed air only — not CO2
Brand Rebel

Good to know before you buy

You will also need a SCUBA bottle or high-pressure air source and, in most cases, a SCUBA fill adaptor to connect to it. We fill tanks on site at Skirmish Wycombe Airsoft, so if you play with us regularly you may not need to fill at home at all — this is for players who want the independence.

Frequently asked questions

Is this the hose that connects my tank to my gun?
No, and this is the most common mix-up. That is a remote line. This hose is only for refilling the tank itself, between games.

What else do I need to fill at home?
A SCUBA bottle or high-pressure compressor, and usually a SCUBA fill adaptor. Ask us and we will talk through a complete home-fill setup before you spend anything.

How full should I fill the tank?
To the pressure rating printed on the bottle — 3000 PSI or 4500 PSI — and no further. Fill slowly in stages rather than all at once.

Can I use it with CO2?
No. Compressed air only. CO2 behaves very differently under pressure and must not be put through this hose or an airsoft HPA tank.

⛔ Filling is a high-pressure operation. Fill slowly and in stages — a rapid fill spikes pressure and heat, and can damage the tank or burst disc. Never exceed your tank’s rated pressure (3000 or 4500 PSI, printed on the bottle). Compressed air only, never CO2. If you are not completely confident, we fill tanks on site at Skirmish Wycombe Airsoft.
💡 Titan Forge Airsoft tip: browse our HPA tanks and full HPA range, or message us on WhatsApp and we will spec it with you.