• SHS blue anodised aluminium air seal nozzle for G36 AEGs, open bore facing the camera
1 1

SHS Aluminium Air Seal Nozzle — G36 AEG

SHS Aluminium Air Seal Nozzle — G36 AEG

£5.95
£5.95
Sale Sold out
Tax included. Shipping calculated at checkout.

In stock

DETAILS

SKU: 84133304
View full details
SHS Aluminium Air Seal Nozzle for G36 AEG — the o-ring does the work, and this is the part that keeps a G36 sealing properly. A service part rather than an upgrade.

G36 builds run their own nozzle length, and it is not interchangeable with an M4 one despite both being Version 3 or Version 2 derived depending on the model.

A worn nozzle o-ring on a G36 shows up as a gun that sounds healthy but drops twenty feet of range, because air escapes around the nozzle instead of driving the BB.

Specifications

Specification Detail
Platform G36
Material Aluminium
Air seal Yes, o-ring sealed against the cylinder head
Manufacturer SHS
Sold as Single nozzle

Good to know before you buy

A G36 strip is not difficult but it is fiddly, so check the tappet plate arm while the shell is open.

Frequently asked questions

Will this fit any G36 variant?
It is cut to the G36 nozzle length. G36C, G36K and full-length G36 share that dimension on most builds, but manufacturers do vary, so measure the old one before ordering.

What does air seal mean?
The nozzle carries an o-ring that seals against the cylinder head, so the cylinder's air goes into the hop unit rather than leaking around the outside.

Can I use an M4 nozzle instead?
No. M4 and G36 nozzle lengths differ, and a nozzle that is too long or short will either crush the bucking or fail to chamber a BB.

⚠ G36 lengths are not universal: several manufacturers build the platform and their nozzles differ slightly. Compare against the original.
💡 Titan Forge Airsoft tip: Keep one on the shelf if a G36 is your main gun, because the strip-down is the slow part, not the part itself. Browse gearbox parts.