Tokyo Marui Hi-Capa 4.3 D.O.R GBB Pistol — Black
Tokyo Marui Hi-Capa 4.3 D.O.R GBB Pistol — Black
In stock
Leave your details and we'll email you as soon as it's back in stock.
Pre-order item
This item isn't in stock yet and won't ship straight away. Pre-order prices can change before stock arrives. For the latest delivery date, WhatsApp us.
Please tick the box to confirm you understand this is a pre-order.
Couldn't load pickup availability
-
Tracked delivery. Free on UK orders over £150. Not in? Use your courier's app to pick a day or a pickup shop.
-
Not sure it's right for you? WhatsApp us 24/7. Send a photo of your setup and we'll check it.
-
HPA tech service in-house. Set-up, tuning and repairs by the team that sells it.
DETAILS
DETAILS

- description
Putting a red dot on a Hi-Capa normally means an adapter plate, which raises the optic, adds a joint that can shift and leaves the sight sitting proud of the gun. D.O.R stands for Direct Optics Ready, and it means the slide itself is cut for the sight. Take the rear iron sight off and the optic goes straight on.
Both mounting options are supplied. The low-mount tab cover sits the sight as close to the bore as the design allows, which is the flatter, faster option. The high-mount base plate raises it slightly and carries a backup iron sight, so you are not blind if a battery dies mid-game. You choose, and you are not buying either separately.
It is the 4.3 rather than the 5.1, so it is the shorter, snappier one: 199mm overall, 801g with a magazine in it, and a cycle fast enough that the dot settles quickly. The slide serrations are cut deeper front and rear with raised ribs, which matters once an optic is in the way of your usual grip.
Specifications
| Specification | Detail |
|---|---|
| System | Gas blowback with variable hop-up |
| Firing mode | Semi-automatic |
| Overall length | 199mm |
| Inner barrel | 86mm |
| Weight | 801g with an empty magazine fitted |
| Magazine | 28 rounds, cold-resistant die-cast metal |
| Optic mounting | Direct to the slide; low-mount tab cover and high-mount base plate with backup sight both supplied |
| Recommended ammunition | 0.20g to 0.25g 6mm BB |
| Power source | Green gas or HFC134a |
| Also fitted | Extended slide stop lever, flat-faced short trigger, metal notch spacer |
| In the box | Pistol, magazine, both mounting plates and screws, barrel cap, unjamming rod, 100 BBs, manual |
| Muzzle velocity | Not stated by the manufacturer at time of writing |
Good to know before you buy
The part worth knowing before you start buying upgrades: this model uses the updated D.O.R blowback engine, and the manufacturer states that some internal frame parts, nozzles and hop-up components differ from the older 4.3. Magazines are the exception — standard 4.3 and 5.1 gas magazines fit. Aftermarket slides and internals sold for the legacy 4.3 may not, so ask us before ordering a part for it.
The metal notch spacer is a quiet but real improvement. When a gas pistol runs dry the slide slams to the rear, and on the older design that impact lands on a plastic notch which is what eventually gives out. Here a steel plate takes it instead.
No optic is included. The slide is cut for a low-profile sight rather than any sight, so tell us what you are planning to mount and we will tell you whether it will sit properly before you buy it.
No muzzle velocity is published for this model. We chronograph every gas pistol before it ships and will tell you what yours actually reads.
Frequently asked questions
Does it come with a red dot?
No, the pistol is cut and plated for one but the optic is separate. Ask us what fits before you order a sight.
Will my existing Hi-Capa magazines work?
Yes. The manufacturer confirms standard 4.3 and 5.1 gas magazines are compatible, and we sell the 4.3 magazine separately.
Can I fit my old 4.3 upgrade parts?
Some, but not safely assumed. The D.O.R engine changed internal frame parts, nozzles and hop-up pieces, so check with us rather than ordering blind.
What is the difference between the two mounting plates?
The low mount puts the sight as low as possible for the flattest sight picture. The high mount raises it a little and adds a backup iron sight.
How does it compare with the 5.1 D.O.R?
Shorter and lighter, so quicker to draw and quicker to cycle. The 5.1 gives you a longer sight radius and a little more weight to steady it.