Tokyo Marui MK18 Mod.1 NGRS Recoil Rifle
Tokyo Marui MK18 Mod.1 NGRS Recoil Rifle
In stock
Leave your details and we'll email you as soon as it's back in stock.
Pre-order item
This item isn't in stock yet and won't ship straight away. Pre-order prices can change before stock arrives. For the latest delivery date, WhatsApp us.
Please tick the box to confirm you understand this is a pre-order.
Couldn't load pickup availability
-
Tracked delivery. Free on UK orders over £150. Not in? Use your courier's app to pick a day or a pickup shop.
-
Not sure it's right for you? WhatsApp us 24/7. Send a photo of your setup and we'll check it.
-
HPA tech service in-house. Set-up, tuning and repairs by the team that sells it.
DETAILS
DETAILS

- description
The MK18 is the shortest serious configuration of the platform, and the one most people picture when they think of special forces inside a building. Ten and a bit inches of barrel, a quad rail you can bolt anything to, and a length that clears a doorway without you thinking about it.
What sets this one apart from a generic short M4 is the front end: the RIS II handguard is officially licensed Daniel Defense, not a lookalike, with 20mm rail on all four faces. The flash hider is the four-prong pattern, the sights are flip-up front and rear, and there are sling mounts at both ends already fitted.
Underneath it is the recoil engine, so every shot sends a weight back into your shoulder, and the gun stops when the magazine is empty. At 3,210g with an empty magazine in it, the weight is honest to the real rifle rather than flattering.
Specifications
| Specification | Detail |
|---|---|
| Platform | MK18 Mod 1, SOPMOD pattern |
| System | Next Generation Recoil Shock, electric |
| Muzzle velocity | 280 to 300 FPS |
| Overall length | 715mm retracted, 790mm extended |
| Inner barrel | 275mm |
| Weight | 3,210g including an empty magazine |
| Magazine | 82-round steel press mid-cap, switchable to 30-round real-cap |
| Handguard | Officially licensed Daniel Defense RIS II |
| Muzzle thread | 14mm counter-clockwise, under a four-prong flash hider |
| Battery | 8.4v nickel-metal hydride crane stock type from the factory |
| In the box | Rifle, magazine, flip-up front and rear iron sights, front sling mount and rear sling endplate, manual and safety cap |
Good to know before you buy
On battery voltage, take this seriously. The rifle is built around the 8.4v nickel-metal hydride stock battery. If you convert it for lithium, stay at 7.4v. An 11.1v pack cycles the mechanism faster than the recoil weights and piston are built to survive, and the damage is not a warranty conversation you will enjoy.
A lithium conversion needs an adapter lead or a rewire rather than just a different battery. We can do that on the bench if you would rather not open it yourself.
The supplied magazine switches between 82 and 30 rounds on an internal mechanism. If you shoot ammunition-limited games, that is one magazine covering both.
Short rifles are loud rifles indoors. The 14mm counter-clockwise thread under the flash hider takes a suppressor or a tracer unit, and both are worth having on a gun this length.
Frequently asked questions
Is the Daniel Defense rail genuine?
Yes, it is an officially licensed RIS II rather than a copy, which is a large part of what you are paying for.
Can I run an 11.1v lithium battery?
No. Stay at 7.4v if you convert it. Higher voltage over-cycles the recoil weights and strips the piston on this platform.
Does it need a lithium conversion to work?
Not at all. It runs as supplied on the 8.4v stock battery. Conversion is an upgrade for trigger response, not a requirement.
Is it a mid-cap or a hi-cap magazine?
A mid-cap at 82 rounds, with a switch inside that takes it down to a 30-round real-cap.
Will it take a suppressor?
Yes, the thread is 14mm counter-clockwise once the flash hider is off.