1 4

VFC BCM Gunfighter MCMR Handguard

VFC BCM Gunfighter MCMR Handguard

£139.95
£139.95
Sale Sold out
Tax included. Shipping calculated at checkout.

In stock

Length: 7"
  • Tracked delivery. Free on UK orders over £150.
  • Not sure it's right for you? WhatsApp us 24/7. Send a photo of your setup and we'll check it.
  • Collect in store. Free click & collect from our shop at Skirmish Wycombe.

DETAILS

SKU: 45730570
View full details
VFC BCM Gunfighter MCMR Handguard — three lengths of metal M-LOK with a full top rail. Cut for the VFC M4 series AEG and its own barrel nut.

The MCMR is the slim BCM rail, and the reason people choose it is the hand feel: a narrow body with M-LOK slots round the sides and underneath, and a continuous 20mm Picatinny rail along the top for sights and night vision.

Three lengths run in the range. Seven inches measures 190mm and suits a short, fast CQB build; thirteen measures 340mm and covers almost the full barrel on a carbine; ten sits between the two and is the one most people end up on.

All three are metal and all three use VFC’s own M4 barrel nut, which is the detail that decides whether this will go on your gun. Read the note below.

⚠ It needs the VFC barrel nut. VFC specify these handguards for their own M4 series AEG using the VFC spec M4 barrel nut. A rifle from another maker, or a VFC rifle already converted to a different nut, will not take it without that nut in place.

Specifications

Specification Detail
Type Free-float handguard
Profile BCM Gunfighter MCMR
Lengths 7 inch, 10 inch, 13 inch
Length — 7 inch 190mm
Length — 13 inch 340mm
Construction Metal
Accessory mounting M-LOK slots
Top rail 20mm Picatinny, full length
Platform VFC M4 series AEG, VFC spec M4 barrel nut
Manufacturer VFC

Good to know before you buy

Pick the length by where your hand goes, not by how much rail you can get. A handguard that runs past your support hand is weight you are carrying for nothing.

Frequently asked questions

Which length should I choose?
Seven for a short CQB gun, thirteen if you want rail all the way out, ten for a standard carbine. Measure where your support hand naturally sits.

Will it fit a non-VFC M4?
Only if that rifle is running a VFC spec M4 barrel nut. The nut is the interface, not the receiver.

How much does each length weigh?
No weights are given for any of the three.

💡 Titan Forge Airsoft tip: Grips and hand stops for the slots are in Grips, other rail kit in Rifle Accessories, and glass for the top rail in Sights and Optics.