Skip to product information
1 of 10

VFC VR16 URG-I 11.5" EVO GBB

VFC VR16 URG-I 11.5" EVO GBB

Regular price £409.95
Regular price Sale price £409.95
Sale Sold out
Tax included. Shipping calculated at checkout.

Out of stock

Leave your details and we'll email you as soon as it's back in stock.

Realistic imitation firearm (RIF): you'll choose your defence (UKARA or another) in the cart before checkout. Accepted defences

  • Tracked delivery. Free on UK orders over £150. Not in? Use your courier's app to pick a day or a pickup shop.
  • Not sure it's right for you? WhatsApp us 24/7. Send a photo of your setup and we'll check it.
  • HPA tech service in-house. Set-up, tuning and repairs by the team that sells it.

DETAILS

SKU: 77906466
View full details
VFC VR16 URG-I 11.5" EVO GBB — the hop unit comes out without touching the front end. VFC’s patented EVO system on the military-issue URG-I profile.

Most gas AR owners have had the same afternoon: the grouping has gone, the hop needs looking at, and getting to it means pulling the handguard, the gas block and the barrel nut. The EVO system exists to end that. The hop chamber and inner barrel come out as a unit with the front end still assembled.

Around that sits a steel TDC hop seal with an external adjuster, an EVO one-piece outer barrel, and the V3 lower with its steel hammer set and no gas cut-off, which means fewer parts in the valve-strike path and deeper engagement where it matters.

Externally it is the standard-issue URG-I configuration: an MK16-pattern M-LOK handguard over an 11.5in barrel, faithful enough for a military-spec build and still open enough to personalise. It feeds the V4 magazine, which is the current VFC gas magazine.

Specifications

Specification Detail
Platform URG-I, military issue configuration
System VFC EVO AR gas blowback, built on V3
Hop-up Steel TDC sealing system, externally adjustable
Serviceability Hop chamber and inner barrel replaceable with the front end in place
Handguard MK16-type M-LOK
Outer barrel EVO one-piece, 11.5 inch
Inner barrel 275mm
Overall length 750mm to 830mm
Weight 2,630g
Velocity 110 m/sec
Magazine 30 rounds, VFC V4 gas magazine
Calibre 6mm, 5.95mm BBs
Construction Metal alloy and polymer
Lower internals V3 steel hammer set, no gas cut-off mechanism
Thread Not stated by the manufacturer at time of writing

Good to know before you buy

Velocity is published in metres per second rather than feet. 110 m/sec is roughly 361 FPS on a 0.20g BB, which is above a one-joule site limit, so expect to want it adjusted or to run heavier ammunition. We can set it on the bench before it ships.

The V4 magazine has realigned notches and catch slots on both magazine and receiver. Earlier VFC gas magazines are a different generation, so if you are buying spares, buy V4.

Frequently asked questions

What does EVO actually change?
The hop chamber and inner barrel come out without removing the handguard, gas block or barrel nut, and the hop seal is steel with an external adjuster. On a gas AR that turns an evening job into a few minutes.

Will my older VFC gas magazines fit?
It is specified for the V4 magazine. VFC do not publish a backward-compatibility statement for this one, so treat earlier magazines as something to test.

Is 110 m/sec site legal?
That works out around 361 FPS on 0.20g, which is over a one-joule limit. Ask us to adjust it before despatch or plan on doing it yourself.

What thread is the muzzle?
No thread specification is published for this model.

How is it different from the URG-I 10.3 inch we already sell?
Longer barrel, and this one runs the newer EVO hop system rather than the earlier arrangement.

⚠ A defence is needed for this rifle. It is a realistic imitation firearm in its original finish, so we are required to verify a defence before it leaves us. We recognise UKARA, UKASA, Airsoft Verify, Airsoft Defence, SWAT Airsoft, BAC, the Sportsman Association, a SWAT Pass and membership of any physical airsoft site. Players at our own site can be checked against our records, and stage or screen production qualifies as well. Outside all of those, ask us directly. The cart collects it before checkout.
💡 Titan Forge Airsoft tip: Hop and barrel spares for the EVO system, and the adjustment tool, are in Spare and Upgrade Parts, with optics in Sights and Optics.