1 6

Wolverine Airsoft MTW Billet Tactical 7" CQB

Wolverine Airsoft MTW Billet Tactical 7" CQB

£724.99
£769.95 £724.99
Sale Sold out
Tax included. Shipping calculated at checkout.

Low stock

DETAILS

SKU: 93845802
View full details
📖 New to HPA? This runs on external high pressure air — it needs a tank, a regulator and a line before it will fire a shot. Read our complete HPA guide before buying.
Wolverine Airsoft MTW Billet Tactical 7" CQB — the shortest MTW Wolverine build, and the one that earns its keep indoors. A 208mm inner barrel behind a 7-inch rail, on the Gen 3 billet receiver with an INFERNO Gen 2 and the Spartan board. Nothing projects past your hands that does not need to.

Seven inches is a deliberate choice rather than a compromise. Indoors, in vehicles, and anywhere you have to pie a corner or clear a stairwell, a long gun is a liability — it snags, it telegraphs your position round a doorway, and it is slow to bring onto a close target. This build gives up reach you were not going to use in those settings.

Everything structural is the same as the longer builds. The receiver is cut from solid 6061 and holds Intrinsic Alignment, so the engine, hop and barrel share one axis with nothing to shim. The Tactical trim adds a 1045 steel flash hider in black oxide, a DLG premium real-steel grip and a heavy-duty milspec stock over the Standard furniture.

Air comes in through the integrated filtered grip line, so the line enters at the grip rather than the back of the stock and the filter is already in the path. That keeps the gun tidy on a sling and keeps grit out of the engine.

What you need to run it

Item Notes
HPA tank Not included — see HPA tanks
Regulator Required. Set it inside the 80 to 140 PSI window — see HPA regulators
Air line Not included. Runs through the integrated filtered grip line — see HPA lines
Magazine One PTS EPM-MTW is included, and it runs the empty-mag detection. Spares in AEG magazines
Battery 7.4V mini LiPo on a JST connector, not included

Specifications

Specification Detail
Platform HPA M4/AR — MTW Billet Series, Gen 3 receiver set
Trim Tactical
Receiver CNC machined from solid 6061 aluminium, with Intrinsic Alignment
Engine INFERNO Gen 2
Control board Spartan Electronics MTW — an all-in-one trigger board and FCU
Length 7 inch CQB
Outer barrel 7 inches
Inner barrel 208mm
Rail 7-inch Invictus MK-1 M-LOK
Operating pressure 80 to 140 PSI
Muzzle thread 14mm negative
Trigger T5 curved
Feed tube CNC machined
Dust cover Polymer
Selector Three-position
Flash hider 1045 steel, black oxide finish
Grip DLG premium real-steel
Stock Heavy-duty milspec
Weight 4.1lb, about 1.86kg
Air fitting Integrated filtered grip line, US Foster quick-disconnect
Magazine PTS EPM-MTW with empty-mag detection
Battery 7.4V mini LiPo on a JST connector, not included
Manufacturer Wolverine Airsoft, Kingsport, Tennessee

The three Billet lengths

Build Inner barrel Outer barrel Rail
7 inch 208mm 7" 7"
10 inch 285mm 10.3" 10"
14 inch 380mm 14.5" 13"

Good to know before you buy

The shorter inner barrel does cost you some muzzle energy at a given pressure, which is the honest trade. Indoors that is usually welcome: most CQB sites cap energy low and run a minimum engagement distance, so a gun that is easy to hold under the limit is a gun you can actually use all day.

Frequently asked questions

Is 7 inches too short to be accurate? Not at sane CQB distances. Hop and bucking choice matter far more than barrel length inside thirty metres, and a well-set 208mm barrel will hold a tighter group than most players can shoot.

Can I put a longer barrel in later? Yes. Inner barrels are an MTW-Spec part and the hop unit takes AEG barrels, so you can go longer inside the same rail or change the rail and outer barrel too.

What is the difference between this and the Tactical XB 7 inch? The engine and the board. This runs an INFERNO Gen 2 on the Spartan board, set from the gun. The XB runs the INFERNO XTS with the BLINC Bluetooth FCU, set from a phone.

Does the short barrel change the pressure I run? Not the window — it is still 80 to 140 PSI. You will likely sit lower in it than you would on a 14 inch to hit the same energy, which is why a chrono matters more than a number someone gave you.

Will a tracer unit fit? Yes, the thread is 14mm negative like the rest of the range. The flash hider comes off and a tracer goes straight on.

⚠ Always run a secondary regulator. Never put tank pressure straight into the engine. Set your output before you shoot, and chrono at the site every time.
⚠ UKARA: As a realistic imitation firearm, this product requires UKARA registration or a valid defence. We verify at checkout. Register by playing 3 games over 56+ days at Skirmish Wycombe Airsoft.
💡 Titan Forge Airsoft tip: On a 7-inch gun the hop does the work, not the barrel — spend the money on a good bucking and a chrono session before you touch anything else. See HPA rifles.