Skip to product information
1 of 1

Wolverine Airsoft STORM Category 5 HPA Regulator — On-Tank | 60–180psi

Wolverine Airsoft STORM Category 5 HPA Regulator — On-Tank | 60–180psi

Regular price £148.95
Regular price Sale price £148.95
Sale Sold out
Tax included. Shipping calculated at checkout.

In stock

  • Tracked delivery. Free on UK orders over £150.
  • Not sure it's right for you? WhatsApp us 24/7. Send a photo of your setup and we'll check it.
  • Collect in store. Free click & collect from our shop at Skirmish Wycombe.

DETAILS

SKU: 48606438
View full details
Wolverine Airsoft STORM Category 5 HPA Regulator — wolverine's recommended regulator for all HPA builds. The STORM Category 5 is purpose-engineered for airsoft — the only regulator in this collection built specifically for the pressure ranges and refresh rates that HPA airsoft engines demand.

If you’re running a Wolverine engine, this is the regulator Wolverine themselves recommend. The STORM Category 5 is the latest evolution of the STORM regulator — the original dedicated airsoft regulator — and it brings meaningful engineering improvements over its predecessor without complicating the setup.

The Category 5 features a 36% larger piston area than the classic STORM, which directly translates to a faster refresh rate — critical for high rates of fire where slower regulators show pressure drop between shots. With 2 fewer sealing surfaces than the classic STORM, there are fewer potential failure points. At 59.3mm tall it’s 12% shorter than the original, and the simplified zip-tie tournament lock makes field compliance straightforward.

Specifications

Specification Detail
Output pressure range 60–180psi (adjustable)
Input pressure range 300–1000psi
Adjustment rate ~30psi per turn (hex key)
Hose connector 1/8" NPT (MPT)
Height 59.3mm / 2.33"
Weight ~284g / 10oz
Material Metal alloy
Tournament lock Yes — zip-tie
Compatible engines All Wolverine engines (INFERNO, BOLT, HYDRA, REAPER, STORM); recommended for all HPA airsoft guns

Good to know before you buy

Output pressure adjusts from 60 to 180psi via hex key at approximately 30psi per turn, covering the full operating range of every Wolverine engine on the market. Input pressure range is 300–1000psi, compatible with all standard HPA tanks. Note: the pressure gauge is accurate at rest but will read low under rapid fire due to the regulator’s refresh rate exceeding the gauge response — this is normal behaviour.

Frequently asked questions

What pressure should I set it to?
Whatever your engine wants and your site limit allows — the range is 60 to 180psi and it moves about 30psi per turn of a hex key. Set it on the gauge and chronograph before you play.

Will it run my tank?
It takes 300 to 1000psi in, which covers a standard HPA bottle, and the hose connector is 1/8″ NPT. Bottles are in HPA tanks.

Which engines is it for?
Wolverine list every one of their engines — INFERNO, BOLT, HYDRA, REAPER and STORM — and it is the regulator they recommend for their own kit.

Is it tournament-lockable?
Yes, by zip-tie, so a marshal can sign it off and see it has not been touched. Alternatives are in HPA regulators.

🔧 Titan Forge Airsoft tip: The STORM Category 5 is the regulator we fit to our own MTW builds at Skirmish Wycombe Airsoft. If you’re building a new HPA rig from scratch, pair it with an HPA line and one of our HPA tanks for a complete setup.