Wolverine INFERNO Gen 2 HPA Engine — MTW
Wolverine INFERNO Gen 2 HPA Engine — MTW
Low stock
Notify Me About This Product
Couldn't load pickup availability
DETAILS
DETAILS
- description
Most INFERNO listings are drop-in kits for an AEG gearbox. This one is not. It is the version Wolverine build for their own MTW platform, and it is the engine an MTW leaves the factory with. If you are rebuilding a tired MTW, or bringing a second-hand one back to standard, this is the part rather than an AEG kit with an adapter.
Hybrid is the word Wolverine use for the Gen 2, and it earns its place. An open bolt is the easy one to tune and the efficient one to run; a closed bolt is the one that behaves itself at the hop. A patented independent poppet and nozzle gives you both, because loading the BB and firing it become two separate movements with a pause in between.
One solenoid fires it directly, so there is less to set up than on a twin-solenoid engine, and the manufacturer puts the efficiency gain over the previous generation at 10-15%. On an MTW running mid-caps that shows up as magazines per fill, not as a number on a page.
Wolverine supply this one as the engine and an o-ring kit. There is no control board in the box — an MTW already has its own electronics, and this is the part that goes in front of them.
Specifications
| Specification | Detail |
|---|---|
| Platform | MTW only — not an AEG gearbox kit |
| Fits | MTW M4, MTW-9 and MTW-308 |
| Does not fit | MTW Shotgun |
| Supplied as | Engine and o-ring kit |
| Electronics included | No — the MTW's own control board is used |
| Design | Hybrid — independent poppet and nozzle, patented |
| Solenoid | Single, direct-fired |
| Input pressure | 60-140 PSI |
| Rate of fire | 5-35 RPS, adjustable |
| Output energy | Adjustable 1-3J, build dependent |
| Dwell | Fully adjustable in the FCU |
| Battery | JST, 6-8V |
| Electronics | Works with any Wolverine Airsoft control unit |
| Line | Integrated filtered line |
| Efficiency | Wolverine estimate 10-15% over the previous generation |
| Manufacturer | Wolverine Airsoft |
Frequently asked questions
Will it fit my MTW Shotgun? No. Wolverine list the MTW M4, MTW-9 and MTW-308 as compatible and the MTW Shotgun as not. The Gen-12 shotgun runs the HAVOC engine instead.
Is this the same as the AEG INFERNO Gen 2? No. The AEG versions are drop-in kits for a V2 or V3 gearbox and ship with a control board. This is the MTW-specific engine, supplied without electronics.
What is in the box? The engine and an o-ring kit — that is what the manufacturer lists. No solenoid-valve seal kit, no control board and no airline.
Do I need anything else to run it? A tank, a regulator, a line and a battery, exactly as before. If you are replacing an engine in a working MTW you already have all of it.
What does hybrid actually mean here? That the engine gets the tuning and efficiency of an open-bolt design and the hop-up behaviour of a closed-bolt one, by controlling the poppet and the nozzle independently rather than off one movement.