Strike Carbon FAT-CAN Airsoft Suppressor 6" x 50mm

The 6-inch FAT-CAN is the full-length version of Strike Carbon's wider-bore suppressor family. Where the 4-inch trades dampening volume for compactness, the 6-inch uses every available millimetre of internal length for expansion volume. With the matching 48mm felt baffle stack installed at full length, this is the configuration that delivers the deepest, most thoroughly dampened report in the line.

The 50mm external diameter gives 48mm of internal bore — substantially wider than the typical 38mm airsoft suppressor. That extra cross-section is what lets the FAT-CAN produce its characteristic deeper sound: more air can expand sideways before reaching each baffle, so the pulse loses energy through expansion as well as through baffle contact. Pair it with the 48mm felt baffle system to maximise the effect.

Construction matches the 4-inch FAT-CAN: carbon fibre body bonded to CNC-machined 7075 aerospace aluminium end caps. The 7075 alloy is high-strength structural aluminium — important on the muzzle end cap which takes thread load on every install. Weight is 99g total, only 14g more than the 4-inch despite the additional 2 inches of length, because the bulk of the weight is in the end caps not the carbon tube.

Thread is 14mm CCW, the airsoft standard. Tracer-unit compatible for low-light play. The internal volume comfortably accommodates a full felt-baffle stack with room for a tracer unit at the muzzle end if desired (verify your tracer length against the available internal volume after baffles are installed).

Specifications