Skip to product information
1 of 2

Heretic Labs Article I — HPA Speedsoft Gun — Blood Red

Heretic Labs Article I — HPA Speedsoft Gun — Blood Red

Regular price £799.95
Regular price Sale price £799.95
Sale Sold out
Tax included. Shipping calculated at checkout.

In stock

Realistic imitation firearm (RIF): you'll choose your defence (UKARA or another) in the cart before checkout. Accepted defences

  • Tracked delivery. Free on UK orders over £150. Not in? Use your courier's app to pick a day or a pickup shop.
  • Not sure it's right for you? WhatsApp us 24/7. Send a photo of your setup and we'll check it.
  • HPA tech service in-house. Set-up, tuning and repairs by the team that sells it.

DETAILS

SKU: 32523481
View full details
Complete your setupEverything you need to run your RIF. Skip anything you already own.10% off when you add one of each: tank, regulator, line and battery 4 items · £143.30 ShowHide
Air tank
Regulator
Air line
Battery
Nothing picked yet

📖 New to HPA? This runs on external high pressure air — it needs a tank, a regulator and a line before it will fire a shot. Read our complete HPA guide before buying.
Heretic Labs Article I — the red one, and the only Article I colour Heretic currently charge a premium for. Skeletonised MTW-spec billet receiver, carbon fibre outer barrel, INFERNO Gen 2 engine, and 0.95kg all in.

Red is not a sticker on this. The anodising is the finish of the receiver set itself, which matters on a gun whose whole design philosophy is that there is nothing on it that does not need to be there — no rail to break the line up, no furniture to paint, just the billet and the carbon.

Heretic’s brief for the Article series was subtraction. The charging handle goes, the buffer tube goes, the stock goes, and what is left is a receiver set machined until there is nothing surplus holding it together. The published figure for the finished gun is 0.95kg, which is roughly what a loaded gas pistol weighs, and that single number explains why speedsoft players keep buying them.

Underneath it is an INFERNO Gen 2 running Heretic’s own programming, with a control board that adds a binary trigger option on top of the engine’s normal behaviour. The trigger itself rides on a Delrin bearing and adjusts for pre-travel, post-travel and the actuation point, so the break can be set where your finger expects it rather than where the factory left it.

Because it is built to MTW spec rather than to its own pattern, the aftermarket is already there: MTW-spec parts fit, and so do a great many real-steel components. A red receiver with a red carbon barrel is a starting point, not a finished build.

What you need to run it

Item Notes
HPA tank Not included — see HPA tanks
Regulator Required. The engine takes 60 to 140 psi — see HPA regulators
Air line Not included — see HPA lines
Battery A 6 to 8V JST battery is required
Magazines A PTS EPM-MTW with empty-mag detection is supplied — spares in AEG magazines

None of that list is included with the gun, the magazine aside, so budget for the air side before you budget for the colour. Everything the manufacturer does publish about the gun itself is below, and anything they leave unstated is left out rather than guessed.

Specifications

Specification Detail
Colourway Blood Red
Manufacturer part number HTC-CA-101-RD-SKU
Platform Built on MTW-Spec — takes MTW-Spec and real-steel aftermarket parts
Receiver Skeletonised MTW-Spec CNC billet aluminium set with CNC feed tube
Engine Blacked-out INFERNO Gen 2 with Heretic Labs programming and binary fire mode
Trigger CNC speed trigger on a low-friction Delrin bearing, adjustable for pre-travel, post-travel and actuation
Outer barrel Genuine carbon fibre
Inner barrel 150mm
Weight 2.1 lbs (0.95kg)
Input pressure 60 to 140 psi
Estimated energy range 0.8 to 1.65 J
Rate of fire 5 to 35 RPS, adjustable
Battery input JST 6 to 8V
Stock interface Picatinny stock adapter with a QD point
Magazine PTS EPM-MTW with empty-mag detection
Removed by design Charging handle, buffer tube and stock
Shipped weight and box 4.5 lbs, 18.5 x 10.75 x 2.5 in

Good to know before you buy

Heretic price the red above the black. On the manufacturer’s own listing Blood Red sits at the top of the Article I range rather than level with it, so if the colour is the only thing drawing you, the black is the cheaper way to the same gun.

Wolverine put a caveat on the whole Article series: your gun may arrive with a different magazine from the one pictured, because of international shipping. The EPM-MTW spec is what is quoted; the exact mag in the box is not guaranteed to match the photograph.

There is no buffer tube, so a stock is not a bolt-on afterthought — it has to go through the Picatinny adapter, which is also where the QD sling point lives.

The energy figure Heretic publish is a range, not a setting. Where it lands is down to your regulator, so set the output first and chrono before you play rather than assuming it arrives inside your site limit.

No FPS number is published for it, only the 0.8 to 1.65 J window. If your site works in feet per second, convert from joules at the BB weight you actually shoot.

Frequently asked questions

How is this different from the Midnight Black?
Only the finish, as far as the manufacturer states. The receiver set, the engine, the barrel and every published figure are the same. Heretic list it at a higher price than the black, which is the one practical difference.

Is it semi only?
No. This is the standard version. Heretic do make a semi-only build of the Article I, but it is a separate item and we do not stock it.

What is binary fire mode?
The gun fires once when the trigger is pulled and again when it is released. Heretic build it into their own programming on the INFERNO Gen 2 as an option on the control board. Check your site allows it before you use it.

What do I need on top of the gun?
A tank, a regulator, a line and a 6 to 8V JST battery. None of those are in the box, and the regulator is not optional — the engine wants 60 to 140 psi.

Will MTW parts fit it?
Yes. It is built on MTW spec rather than a pattern of its own, which is the reason the parts shelf for it is already deep.

What does it weigh with a tank?
Heretic publish 2.1 lbs for the gun. They do not publish a figure with a tank and line attached, and that depends on which tank you choose, so we are not going to quote one.

⚠ Always run a secondary regulator. Never put tank pressure straight into the engine. Set your output before you shoot, and chrono at the site every time.
⚠ UKARA: As a realistic imitation firearm, this product requires UKARA registration or a valid defence. We verify at checkout. Register by playing 3 games over 56+ days at Skirmish Wycombe Airsoft.
💡 Titan Forge Airsoft tip: The black is in Heretic Labs, and the tanks, regulators and lines it needs are in HPA.