1 9

Wolverine Airsoft x TTI JW4 Dracarys GEN-12 HPA Shotgun (2026 Edition)

Wolverine Airsoft x TTI JW4 Dracarys GEN-12 HPA Shotgun (2026 Edition)

£954.95
£954.95
Sale Sold out
Tax included. Shipping calculated at checkout.

In stock

DETAILS

SKU: 12186670
View full details
📖 New to HPA? This runs on external high pressure air — it needs a tank, a regulator and a line before it will fire a shot. Read our complete HPA guide before buying.
The John Wick 4 shotgun, licensed by Taran Tactical and built as a working HPA gun. A 1:1 replica of the Dracarys, on the HAVOC 6 engine with the BLINC Bluetooth FCU behind it. Six BBs a shot, in semi, burst, full-auto or binary.

Taran Tactical built the original for the film, and this is a licensed 1:1 of it rather than a lookalike. The receiver set is CNC machined aluminium in grey anodising with dual charging handles, the rail is a 10-inch KeyMod replica of the Dracarys unit, and the furniture is a genuine BCM grip with a licensed buttstock.

What makes it worth owning as a gun rather than a prop is the engine and the board. The HAVOC 6 fires six BBs with every shot at an adjustable 0.6 to 1.1 joule per pellet, and the BLINC Bluetooth FCU gives you semi, two-to-nine round burst, full-auto and binary, all set from a phone along with dwell and rate of fire.

Binary on a six-pellet shotgun is an unusual combination and worth knowing about: it fires on the pull and again on the release, which doubles your volume for the same trigger discipline. On this platform that is twelve BBs per cycle, so it is a setting to use deliberately rather than leave switched on.

Air comes in through a fixed rear airline connector rather than the grip, so the line runs to a hardpoint at the back of the gun. Like the SBS, this is its own platform: Wolverine describe MTW-Spec compatibility as limited, and the magazine is a 1:1 Gen-12 replica holding 140 rounds with empty-mag detection.

What you need to run it

Item Notes
HPA tank Not included — see HPA tanks
Regulator Required. Set it inside the 80 to 140 PSI window — see HPA regulators
Air line Not included — see HPA lines
Magazine One 1:1 Gen-12 replica magazine is included, 140 rounds, with empty-mag detection
Battery 7.4V mini LiPo on a JST connector, not included
Muzzle devices Gen-12 specific. M4 flash hiders and tracers do not transfer to this platform
Air connection Fixed rear airline connector, so the line does not route through the grip

Specifications

Specification Detail
Platform HPA shotgun — Gen-12 MTW, TTI Dracarys 2026 edition
Licence Taran Tactical and Genesis Arms, as featured in John Wick 4
Receiver CNC machined aluminium, grey anodised, with dual charging handles
Rail 10-inch KeyMod TTI Dracarys replica. An M-LOK rail is available separately
Control board BLINC Bluetooth FCU
Fire modes Semi, two to nine round burst, full-auto and binary
Charging Spring-loaded mock bolt carrier group with ambidextrous charging knobs
Furniture Genuine BCM grip and a licensed buttstock
Air connection Fixed rear airline connector
Magazine supplied 1:1 Gen-12 replica magazine, 140 rounds
Magazine compatibility MTW-Spec 308 and SR25 pattern, including the PTS EPM-LR SR25
Weight 5.0lb, about 1.9kg
Battery 7.4V mini LiPo on a JST connector, not included
Engine HAVOC 6
Shot pattern Six BBs per shot
Output energy Adjustable, 0.6 to 1.1 joule per BB
Inner barrel 208mm
Input pressure 80 to 140 PSI
Trigger T5 curved
Magazine capacity 140 rounds, with empty-mag detection
MTW-Spec compatibility Limited — the Gen-12 does not share the M4 parts bin
Manufacturer Wolverine Airsoft with Genesis Arms, under EMG distribution, with Taran Tactical

Dracarys against the SBS

Dracarys 2026 (this one) Gen-12 SBS
Engine HAVOC 6 HAVOC 6
Control board BLINC Bluetooth FCU Spartan Electronics Control Board
Fire modes Semi, 2-9 burst, full-auto, binary Semi, burst, full-auto
Rail 10-inch KeyMod Dracarys replica 7-inch Invictus M-LOK
Charging handles Ambidextrous, dual Right-hand knob
Furniture Genuine BCM grip, licensed buttstock A2 grip and stock
Air connection Fixed rear airline connector Through the grip
Weight 5.0lb 4.9lb

Frequently asked questions

Is this an officially licensed replica? Yes. It is licensed by Taran Tactical and Genesis Arms as the gun featured in John Wick 4, which is why the rail and the markings are correct rather than approximated.

What does binary mode do on a shotgun? It fires once when you pull the trigger and once when you let it go. With six BBs a shot that means twelve per cycle, so it empties a magazine very quickly.

How many trigger pulls per magazine? About twenty-three on semi, since 140 rounds divided by six pellets is what you get. In burst or binary, far fewer.

Can I fit the M-LOK rail instead? Yes, Wolverine offer one separately. The KeyMod Dracarys rail is what makes it screen-accurate, so most owners keep it.

Will MTW parts fit it? Only to a limited extent. Wolverine are explicit that Gen-12 compatibility is limited, and the hop, bucking and muzzle devices are Gen-12 parts. Ask us first.

Does the rear airline connector come fitted? Yes, it is part of the build rather than an accessory. Message us about the right airline length for it before you order one.

⚠ Always run a secondary regulator. Never put tank pressure straight into the engine. Set your output before you shoot, and chrono at the site every time.
⚠ UKARA: As a realistic imitation firearm, this product requires UKARA registration or a valid defence. We verify at checkout. Register by playing 3 games over 56+ days at Skirmish Wycombe Airsoft.
💡 Titan Forge Airsoft tip: Leave binary off until you have learned the gun — twelve BBs a cycle is impressive once and expensive all afternoon. See HPA rifles.